Phantoms
PICORAD manufactures dedicated Ge-68 phantoms for PETCT manufacturers such as GE Healthcare, Siemens Healthineers, etc.
Details
Dose Calibrator Resources
The dose calibrator sources are sealed in a plastic bottle allowing easy and safe handling.
Details
Spot Markers
Picorad sources are designed for verification and calibration of semiconductor and scintillation spectrometers and radiometers, ionizing chambers, etc.
Details
Rod Sources
The calibrated rod sources are manufactured by gravimetric transference of NIST traceable solutions and calibration is confirmed using a sodium Iodide detector or Dose Calibrator.
Details
Pen Point Marker
Pen point marker is designed for highlighting or tracing the outlines of a particular anatomical region or feature on a patient during imaging.
Details
GM Survey Meter
The DolMo product range, together with our user-centric accessories, is a new solution for dose, dose rate, and contamination measurements.
Details
Thyroid Uptake Device
The ISOMED 2162 Thyroid Uptake System is a Class II medical device used for nuclear medicine applications.
Details
Hand Foot Monitor
The HFC product range represents modern fixed contamination monitors designed for special use in workplaces where open radionuclide sources are present.
Details
Well Type Counter
The ISOMED 2100 Well-Type Counter is a nuclear medicine measurement system designed for the nuclide-specific measurement of gamma-emitting samples with low activity and small volumes.
Details
Dose Calibrator
The NUMED X40 Dose Calibrator is designed for the rapid and accurate determination of the activity and volume activity of radioactive isotopes used for diagnostic testing and treatment in nuclear medicine.
Details
Area Monitor
ALMO Series Area Monitors come with 6 different Geiger Muller (GM) tubes with internal and external probes to determine the radiation dose rate in the radiation areas accurately and quickly.
Details
Survey Meter with Plastic Scintillator
CoMo 170 is a modern device in the field of surface contamination monitoring.
Details
Fume Hood
Used in nuclear medicine and radiopharmacy to protect operators from alpha, beta, and gamma radiation while safely ventilating hazardous vapors.
Details
L Block Shield
“L” type bench top block shield is designed to create a protected working area for dose preparation and for the safe use of 511 keV isotopes.
Details
Lead Shielded Waste Containers
These products are designed for safe radioactive waste handling and storage in nuclear medicine environments.
Details
Table Top Syringe Shield
The Shielded Syringe Holder will safely hold and transport unshielded syringes.
Details
Syringe Carrier
Shielded Syringe Carriers reduce exposure while storing or transporting radioactive materials.
Details
Nuclear Medicine Furniture
The Waste Cabinet is designed for storing “non-sharps” radioactive waste.
Details
Lead Brick
Lead bricks are high-density, high-purity blocks primarily used for radiation shielding in medical facilities, nuclear laboratories, and X-ray rooms, as well as for heavy-duty ballast and counterweights.
Details
Syringe Shields
These injector shield decals have the most popular design among the injector shield today.
Details
Radiodecontamination Solutions
This lightweight yet powerful concentrated decontamination solution safely cleans radioactive contamination from laboratory equipment and has a unique affinity for I-123 / I-125 / I-131.
Details
Wearable Products
These are Lead Apron,Lead Goggles,Lead Gloves designed to reduce the effect of radiation.
Details
Gamma Probe Systems
CENNA-500W wireless intraoperative gamma probe system for SLNB and radioguided surgery.
Details
Iodine-131 Tank Systems
Controlled liquid-waste tank systems for radioiodine treatment rooms with PLC control.
Details
Elliptical Lung-Spine Phantom
The Elliptical Lung-Spine Body Phantom includes both the spine and fillable lung inserts.
Details
Flanged Jaszczak Fantom
Jaszczak Phantom is a SPECT/PET imaging phantom available in four models designed for different spatial resolution levels, from ultra-high-resolution systems to lower-resolution clinical imaging systems.
DetailsFlanged Deluxe Jaszczak Fantom
The Flangeless Deluxe Jaszczak Phantom has both SPECT and PET capabilities, if a PET lid is purchased.
Details
Hoffman 3D Brain Fantom
The Hoffman 3D Brain Phantom provides an anatomically accurate simulation of radioactivity distribution for brain SPECT, brain PET studies, and distribution of proton density and relaxation parameters for brain MRI studies.
Details
Micro, Mini, and Ultra-Micro Hot Spot Phantoms
The Hot Spot phantom is designed for SPECT, but may be utilized for PET.
Details
Mini Deluxe Phantom
The Mini Deluxe phantom is a preclinical product that has both SPECT and PET capabilities.
Details
NEMA Dispersion Fantom
The Nema Scatter Phantom is designed in accordance with the recommendations by the National Electrical Manufacturers Association (NEMA) to standardize the measurement of count rate performance of a scintillation camera in the presence of scatter.
Details
NEMA PET Fantom
The NEMA 94 PET Phantom consists of 1 large outer cylinder, 2 smaller fillable cylinders, 1 solid PTFE cylinder, and 3 stainless steel line sources.
Details
NEMA PET Sensitivity Phantom
The NEMA PET Sensitivity Phantom is designed in accordance with the recommendations by the National Electrical manufacturers Association (NEMA) to standardize the measurement of performance of PET.
Details
NEMA SPECT Body Fantom
The NEMA SPECT Body Phantom Set is designed in accordance with the requirements set forth by the National Electrical Manufacturers Association (NEMA) to standardize the measurement of performance of gamma camera and SPECT systems.
Details
PETCT Fantom
The PET-CT Phantom includes internal structures (five spheres and three rods) which when imaged with both modalities can demonstrate how accurately the two image sets are aligned.
Details